The SK-3 is one of our solar pre-engineered renewable energy kits. Simple to setup and operate, and with very little maintenance. It’s an ideal energetic solution, since they use clean renewable energy sources that require no fuel to operate like gasoline powered generators.
Covers the electric energy needed to preserve food and medications, provide means of communication, lights and sufficient energy to power a laptop and television.
This system can sustain 2.1kWh (look at chart 1) of daily energy, or the following devices during a day:
| Device | Time |
| 12cf Refrigerator (moderate use) | 24 hours |
| 4x 40W CFL light bulbs | 4 hours |
| Laptop | 4 hours |
| 19″ LCD TV | 2 hours |
| Cellphone Charger | 2 hours |
| Radio | 2 hours |
The SK-3 can also be used in entertainment, water pumping and telecommunication systems.
The kit includes the following components:
- 3x 200W Solar panels
- MPPT charge controller
- 1000W inverter
- Inverter install kit
- PV cables
- VDC breakers
- Electrical Enclosure
- PV mounting hardware (optional)
Add-ons for the SK-3 include:
- Choose between Flooded or AGM type batteries, hardware is included.
- Higher capacity power inverter (either pure or modified sine wave).
- Solar panel extension, comes with PV cables.
- Pre-wired solar component with a plug-and-play type control enclosure
| System Specifications | ||
| System Voltage | VDC | 24 |
| Nominal Power | W | 600 |
| Solar panels | 3 | |
| Typical panel dimensions | inches | 59 x 40 x 2 |
| Power Inverter (Pure sine) | W | 1000 |
| Avg. Energy per day | kWh | Look at chart 1 |
| Battery capacity | Ah | 210 (Look at chart 2) |
We recommend a minimum 210Ah – 315Ah battery bank for enough energy storage to last one day without charging the batteries and not discharging them more than 50%.
Contact us for pricing