This battery backup system comes with an integrated and pre-wired 1800W inverter-charger making it easy to set up and operate. The RSK-200 is a versatile and complete energy backup system since it can charge batteries by using the electrical grid (VAC charger), generator, or renewable energy sources. If using wind power, the minimum starting velocity needed to run the turbine is 12mph (we recommend 15mph).
With 200Ah battery capacity the following electrical devices can be powered before discharging the battery to 95%.
| Device | Time |
| Office with laptop, printer, modem cellphone and CFL light-bulbs | 30 hours |
| 18cf Refrigerator (moderate use) | 15 hours |
| 27″ LCD TV, Nintendo Wii and laptop | 10 hours |
| Microwave | 1 hours |
| Small vertical fan | 45 hours |
| 100W CFL lightbulb | 75 hours |
The kit includes the following components:
- 200W solar panel or 400W wind turbine
- Central Power Hub with battery enclosure
- MPPT charge controller
- PV cables
- VDC breakers
- Electrical enclosure
- PV mounting hardware (optional)
- Turbine tower kit (optional)
Add-ons for the RSK-200 include:
- 2 or 4 AGM type batteries, hardware is included.
- Solar panel extension, comes with PV cables
- Add a Wind turbine
- Additional battery enclosure expansion
| Solar / Wind Component | ||
| Typical Panel Voltage (Vmp) | VDC | 26.6 |
| Nominal Power | W | 200W – 400W |
| Typical panel dimensions | inches | 59 x 40 x 2 |
| Typical rotor diameter | inches | 46 |
| Central Power Hub | ||
| System Voltage | VDC | 12 |
| Hub + battery enclosure dimensions | inches | 35.8 x 55.6 x 50.8 |
| Inverter-charger (modified sine wave) | W | 1800 (2880 surge) |
| Battery capacity | Ah | 200 (400 w/expansion) |
To prolong battery life we recommend not to discharge the battery bank more than 50% if used continuously.
Contact us for pricing